Liquid >> In line filler by volumetric - Pet Bottle 500ML – 5000 ML JCF Series
JCF series fully automatic in-line volumetric piston pump filling machine are with in-line system designed for lower production demand however with highest flexibility in charges of container shapes and sizes. Its greatest advantage being able to handle great versatility of containers by just simple adjustment in the filling cabinet. To meet various production capabilities, you may choose from the in-line JCF series with 4, 6, 8, 10 etc… filling nozzles machine. Volume and demand. We can further automate your entire filling lines with in feed table or turn table, capping or sealing induction sealing, labeling automatic cartooning and complete conveyor systems.


Container type
Square
rectangular
round tin
jerry can
pail
bucket etc
Filling capacity
5 to 30kg (5 to 30 liters) via electronic load cells
Filling mode
Manual/Gross.Net fill
Sequencing
Auto feed, locating filling and discharging fully microprocessor controlled with electronic sensing device
Filling mode
Drip proof nozzles for under bung-hole fill with 2 stages medium/slow control. Nozzle assembly adjustable for centers and for height by pneumatic control
Drip Tray
Automatic drip tray to collect any residual drip
Holding tank
Centrally located product holding tanks is fabricated in 304 stainless steel, polish interior and exterior for mounting above inlets, complete with a lid. Opening and closing of the ball valves are automatically controlled by both HIGH and low level detectors to maintain liquid inside the tank.
Material
Parts in contact with the liquid are SS 304 / 316 stainless steel, P.T.F.E. and PVC hose
Air requirement
6-7kg/sq m at 0.2 cu.m/min
Finish
Stainless steel 304
Electrical supply
380 or 410 VAC + 10% to -15% (factory preset) 50/60Hz
Operating temperature
-5deg C to 35 deg C