Liquid >> In line filler by weight - Tin/Jerry Can 5kg -30 kg JTF Series
This automatic weight-controlled filling machine is designed for tins. Jerry can, pail, bucket (or any containers on request) ranging from 5 to 30kg capacity. Most suitable for a wide range of liquids.
It is fully microprocessor controlled and contained many sophisticated functions to fill jerry can to desire weight accurately and efficiently. Designed to fill directly from supply pump and coupled with pressure regulator that active near the target weight, this two stages filling control fully ensure a clean and spillage free operation with last drops collected by the automatic drip tray.
Revolutionary new fully automatic tin filling machine that run independently without operator.


Container type
Square
rectangular
round tin
jerry can
pail
bucket etc
Filling capacity
5 to 30kg (5 to 30 liters) via electronic load cells
Filling mode
Manual/Gross.Net fill
Sequencing
Auto feed, locating filling and discharging fully microprocessor controlled with electronic sensing device
Filling mode
Drip proof nozzles for under bung-hole fill with 2 stages medium/slow control. Nozzle assembly adjustable for centers and for height by pneumatic control
Drip Tray
Automatic drip tray to collect any residual drip
Holding tank
Centrally located product holding tanks is fabricated in 304 stainless steel, polish interior and exterior for mounting above inlets, complete with a lid. Opening and closing of the ball valves are automatically controlled by both HIGH and low level detectors to maintain liquid inside the tank.
Material
Parts in contact with the liquid are SS 304 / 316 stainless steel, P.T.F.E. and PVC hose
Air requirement
6-7kg/sq m at 0.2 cu.m/min
Finish
Stainless steel 304
Electrical supply
380 or 410 VAC + 10% to -15% (factory preset) 50/60Hz
Operating temperature
-5deg C to 35 deg C